[Elecraft] Windows 10 and LP-Bridge

Barry LaZar k3ndm at comcast.net
Tue Oct 13 01:37:12 EDT 2015


Don,
     If all that is required  is a port replicator, I'd suggest com0com.  
It works quite well over Windows 10  with HRD and all the other software 
that I use. It's free from Source Forge and a few other sources.

73,
Barry
K3NDM

------ Original Message ------
From: "Don Wilhelm" <w3fpr at embarqmail.com>
To: elecraft at mailman.qth.net
Sent: 10/12/2015 11:38:10 PM
Subject: Re: [Elecraft] Windows 10 and LP-Bridge

>I think LP-Bridge will work just fine with most ham applications, but 
>currently, it will not work with HRD which uses Unicode.
>Larry is working to allow Unicode with LP-Bridge, but it is not there 
>yet.
>
>As I understand it, this is not really a Windows 10 issue, it is an HRD 
>issue.  If you use HRD version 5, you will not encounter a problem.
>
>73,
>Don W3FPR
>
>On 10/12/2015 11:07 PM, Wes (N7WS) wrote:
>>But it allows my logging program(s) to read the K3 and K3S frequency 
>>and my SDR-IQ to track the K3s. And it's free.
>>
>>Why should I complain?
>>
>>  On 10/12/2015 10:33 AM, ae4pb at carolinaheli.com wrote:
>>>So you're saying that LP-Bridge isn't RFC compliant.. ok.. J
>>>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k3ndm at comcast.net



More information about the Elecraft mailing list