[Elecraft] K3S ERR KEY in VFO-B

[Don Wilhelm]

Byron,

There can be several causes - Fred Cady has given you a list of 
possibilities, but I did not see two in that list.

Do you have a microphone connected that might have a stuck PTT switch?
Do you have anything plugged into the ACC connector?

Unplug *everything* except the antenna and power cord - if the message 
is still present when power is turned on, contact K3support.

73,
Don W3FPR

On 10/12/2015 3:04 PM, Byron Peebles wrote:
> I don't see any instructions in how to acknowledge and clear the ERR 
> KEY message from VFO B.
>
> As a result, I'm walking through MENU and CONFIG using K3 Utility macros.
>
> This ERR KEY is happening during power on with no USB no KEY and no P3 
> connected, so I'd like to clear the message so I can spin through the 
> settings menus faster..
>