[Elecraft] K3S + SteppIR DB11 Connections

[Mike K2MK]

Hi David,

The SteppIR controller needs to collect serial communication data. This
information is available over the RS232 port or a K3 or the USB port of a
K3S. The ACC port is not used for this purpose. If you are interested in
RS232 communications you'll want to see the SteppIR application notes on
their Y cable. From there you can get your thoughts together and ask further
questions as required. I posted the document on the SteppIR Yahoo group in
the files section.

https://groups.yahoo.com/neo/groups/SteppIR/files

73,
Mike K2MK



David Ahrendts wrote
> Quick help on connecting the SteppIR SDA 100 controller to the K3S for
> brand tracking, please. Is it the SteppIR Y-cable from the K3S ACC? Or
> does one use the Elecraft KPAK3AUX cable set Y-connector?  
> 
> David Ahrendts, KC0XT, LA
> 
> 
> 
> David Ahrendts   

> davidahrendts@

>    
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft at .qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 

> lists+1215531472858-365791 at .nabble





--
View this message in context: http://elecraft.365791.n2.nabble.com/K3S-SteppIR-DB11-Connections-tp7608986p7609001.html
Sent from the Elecraft mailing list archive at Nabble.com.