[Elecraft] K3 VFO - Linking

Dauer, Edward edauer at law.du.edu
Mon Oct 12 10:40:05 EDT 2015


One other way is to program the LINK function into one of the PF buttons — 
one push and it links / unlinks.

Ted, KN1CBR

------------------------------
>
>Message: 12
>Date: Sun, 11 Oct 2015 18:56:43 -0400
>From: Guy Olinger K2AV <k2av.guy at gmail.com>
>To: Bill Wiehe <bw396ss at yahoo.com>
>Cc: Elecraft Reflector <elecraft at mailman.qth.net>
>Subject: Re: [Elecraft] K3 VFO - Linking
>Message-ID:
>	<CANckpc3461u630ci3j1OZGJA8Ovy2PAy-Z2QyNWhhBK-uRWNcQ at mail.gmail.com>
>Content-Type: text/plain; charset=UTF-8
>
>Hi Bill,
>
>The D10 manual text has been superseded by newer firmware. The only way 
>now
>to do a VFO link is CONFIG: VFO LNK.
>
>Tap on SUB toggles the subRX.
>
>Hold on SUB toggles diversity mode.
>
>This is true for both K3 and K3S. The K3S front panel has a yellow DIV 
>just
>to left of the SUB button. This change from D10 manual procedure was the
>result of a lot of discussion, and would seem permanent because big E has
>etched it into the front panel.
>
>Tapping SUB does *not* clear VFO LNK
>
>Holding SUB (turning on diversity) *does* clear VFO LNK
>
>Note in VFO LNK, moving VFO B knob changes B) and *not* A). Moving VFO A
>knob always changes *both* A) and B) by the same amount.
>
>73, Guy K2AV


More information about the Elecraft mailing list