[Elecraft] Frequency Not Synced for Diversity Receive

[efortner]

Hi Lee,

I finished putting my k3s together last week and with help from Howard at
the Elecraft discovered most of my problems were coming from a bad tcxo. I
also have the sub receiver and want to do diversity receive with 
A separate antenna. My sub receiver is working but I cannot receive any
signals from the Aux ant bnc port. I do not have the antenna tuner option so
have only the Ant 1 so239 and the bnc port with coax cable going to the rear
of radio into the sub receiver. Maybe have something set wrong. Anyone else
had this problem. Radio serial number 10326.

73, 
Earl, K4KAY


-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
dmb at lightstream.net
Sent: Saturday, October 10, 2015 4:43 PM
To: KY7M
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Frequency Not Synced for Diversity Receive

Lee,

A correction to my previous response:

The fix for diversity w mismatched main/sub rx filters was actually
implemented in MCU 5.33 firmware back on 8-3-2015. Of course it's also in
the latest 5.38 firmware as well.

73,
Dale,  WA8SRA


> I am setting up diversity receive using the AUX input for my receiving 
> loop.
> After holding the SUB button to turn on DIVERSITY, the speaker output 
> is obviously off between MAIN and SUB by a hundred Hz or more.  I can 
> hear the same signal on the other speaker most of the time, but the 
> tone is quite different.  I installed a pair of new synthesizer boards 
> several months ago and all else seems to be working properly.  Any 
> suggestions?
>
>
>
> Lee, KY7M


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to efortner at ctc.net