[Elecraft] Guidance Please: XG3 Signal Source Sending CW String

[Jeff Maass K8ND]

Thanks Don!

Got some variants that work in several of the macros, including:

   WM,^3[30TEST_TEST_TEST_K8ND_K8ND_K8ND_TEST$10#;PF,01,01;

The underscore meta-character substitution required for space was a
confuser, as was the initial condition when starting.

73,  Jeff K8ND
________________________________
Jeff,

 

Go back to something more simplistic - just set the XG3 for normal 
signal generator operation.  Do you hear the signal?  If not, check with
XG3 Utility to see what frequency the XG3 is set to produce.


Once that has been verified, try the message - you should hear it at 
that same frequency unless you have something in you coding that is 
changing the frequency.

There is no more, but try with a more simplistic sequence - just the 
text (no power level changes, etc.) and see if that works for you. Once 
you have that working, try adding other things one at a time until you 
have what you want.
73, Don W3FPR

 

On 10/10/2015 7:46 PM, Jeff Maass K8ND wrote:

> G'day Don:

> 

> The XG3 was on '30' to start, with the LED on solid.

> 

> When I pushed/held the 'PF1' button to start the sequence, the '30' LED

> began to blink and continued blinking while the sequence ran.

> 

> Is there more?

>