[Elecraft] K3S-P3 Digital Cooperation

[Matt Zilmer]

The CBLP3Y is connected to the K3S at one end (RJ45).  At the other
end, both DE9 connectors engage the P3 (one male, one female)

This is all documented in the K3S owner's manual.  As of the A1 rev,
the diagram showing the K3S  /  P3 interconnect  is on p18 of that
manual.

73,
matt
W6NIA



On Sat, 10 Oct 2015 13:54:33 -0400, you wrote:



>I'm hampered with issues using the CBLP3Y with my K3S and P3.
>So, my question isn't about "getting it working", but about what 
>features I'm missing.
>
>I have the K3S RJ-45 connected to the lower connection on the P3.
>Q: How do I test that this connection is "working"?
>
>I have a USB A-B cable between my computer and the K3S.
>I have a USB-Serial cable between the computer and the P3.
>Q: Is this losing me any functionality at all beyond the loss of one 
>additional "port" on the computer?
>
>Right now I'm hoping this configuration loses no functionality of data 
>modes between the K3S and P3.
>Q: Can someone confirm I'll be able to use all K3S and P3 coordinated 
>data mode functions this way?
>
>72, Byron
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to mzilmer at roadrunner.com
Matt Zilmer, W6NIA
--
"Always store beer in a dark place."  -R. Heinlein