[Elecraft] SOLVED: K3S Sub - No Signals

[Byron Peebles]

Once again, this was the antenna selection.
I found that PHONE was set to a different ANT than SSB on some bands.
When I squint at the display it says ANT, which looks a lot like ANT1.
My suggestion would be this appear more like the FILTER display with [ 1 
x x ] or something more obvious.
Since I've tripped over it doesn't seem I'm compatible.

Both the P3 and KPA seemed to transmit, which is what confused me.

72, Byron

On 10/09/2015 06:55 PM, Byron Peebles wrote:
> I have found myself again in this mode where pressing the SUB button 
> reveals white noise but no signals.
> When I flick the A/B or hold the BSET buttons, they are really LOUD.  
> But noting on SUB.
>
> I have checked that the antenna is correct (same as MAIN (ANT1), the 
> RF GAIN and AF GAIN are up, and there are no words or icons in the 
> display to suggest I have something else set.
>
> When this happened to me and the radio was new, it was the wrong ANT, 
> not not this time.
>
> Any suggestions?  It's a pain tracking the TX3X guys without SUB 
> giving me signals.
>
> 73, Byron
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nz3o at arrl.net
>