[Elecraft] K1 Power jack size ?

[Dale Putnam]

Thank you Josh, and Brian, and all the rest for the fast answers. 
Very helpful, you guys and this list!!


Have a great day, 
 
 
--...   ...--
Dale - WC7S in Wy
 
 


> Subject: Re: [Elecraft] K1 Power jack size ?
> From: josh at voodoolab.com
> Date: Fri, 9 Oct 2015 17:43:17 -0700
> CC: elecraft at mailman.qth.net
> To: daleputnam at hotmail.com
> 
> Almost certainly 5.5mm. I don't have one, but 5.5x2.1 is by far the most common DC power jack. 
> 
> 73
> Josh W6XU
> 
> Sent from my mobile device
> 
> > On Oct 9, 2015, at 12:45 PM, Dale Putnam <daleputnam at hotmail.com> wrote:
> > 
> > E620026 is the part number for the hole-through PCB mounted power plug for the K1.
> > What is the outside size of that jack? the inside is  2.1mm.
> > 
> > I am planning to build a test jig for the K1 for the lab.
> > 
> > Thankyou, 
> > 
> > Have a great day, 
> > 
> > 
> > --...   ...--
> > Dale - WC7S in Wy
> > 
> > 
> >                         
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to josh at voodoolab.com