[Elecraft] RF/SQL dual control

[efortner]

Hi Fred,

Config SQ main and sub are set to 00. Both main and sub act like regular RF
gain going from 0 to full on but both still have dead spot around 1 o-clock.
Not causing a problem but would like to eliminate it. Still on the bottom of
the learning curve of this radio but learn something new every day.
Thanks for the reply.
73, Earl K4KAY

-----Original Message-----
From: Cady, Fred [mailto:fcady at montana.edu] 
Sent: Monday, November 30, 2015 5:47 PM
To: efortner; 'Elecraft Reflector'
Subject: Re: [Elecraft] RF/SQL dual control

Hi Earl,

Check your Config menu SQ MAIN and SQ SUB.   If SQ MAIN is set to =Sub Pot
the control will act as a squelch control.    Also tapping 1 in the SQ MAIN
menu can choose between FM or ALL mode squelch.
Cheers and 73,
Fred KE7x

For all KE7X Elecraft books, see www.ke7x.com



________________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of efortner
<efortner at ctc.net>
Sent: Monday, November 30, 2015 3:31 PM
To: 'Elecraft Reflector'
Subject: [Elecraft] RF/SQL dual control

I don't know what changed but the dual RF/SQL control for main and sub
receiver cuts out at approximately 1 o-clock position just like a wiper not
making contact on a carbon pot for about

1/8 inch movement of either the large or small knob. The radio is only
several months old and I don't think the control is the problem. Any Ideas.
Radio K3s serial number 10326



Earl, K4KAY

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to fcady at montana.edu