[Elecraft] 2meter off Frequency

[Bill Frantz]

I had a similar problem on my K3. Mine turned out to be plugging 
the ref lock TMP cable into the wrong place on the new synth 
board. It started working when I followed the cabling diagram on 
the installation instructions for the new synth board. 
<http://www.elecraft.com/manual/E740257%20KSYN3A%20Installation%20Rev%20A5.pdf> 
page 15 and 16.

73 Bill AE6JV

On 11/28/15 at 8:36 AM, kissov at me.com (Richard Thorpe) wrote:

>I have a K3 with the 2 meter board it has the K144VX ref lock 
>board and the radio has the K3EXREF installed also installed 
>are the KSYN3A boards.  With all these boards working the 
>2meter frequency is of by 5 kc.  The only way I can bring it 
>back on frequency is by manually adjusting the frequency.  Any 
>ideas as to what is causing this anomaly?  Thank you.

-----------------------------------------------------------------------
Bill Frantz        |The nice thing about standards| Periwinkle
(408)356-8506      |is there are so many to choose| 16345 
Englewood Ave
www.pwpconsult.com |from.   - Andrew Tanenbaum    | Los Gatos, 
CA 95032