[Elecraft] K3 KIO3

[Per-Tore Aasestrand]

The P3 translates the speed of the K3.
Both K3 & P3 should be set to the same baudrate for performance reason.

P-T
LA7NO


On 24 November 2015 at 13:54, Mike Reublin NF4L <nf4l at comcast.net> wrote:

> I'm writing a Windows program for the K3. It connects at 38400 only. In
> trying to figure out what's wrong, I set my P3 and K3 to 9600 and used the
> K3 Utility. It will not connect.
>
> If I set the K3 to 38400 and leave the P3 at 9600, the utility connects,
> but reports it's connected at 9600.
>
> Puzzlement is rampant.
>
> 73, Mike NF4L
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ptaa at ieee.org
>