[Elecraft] No transmit on 12m in split??

[Don Wilhelm]

Larry,

The K3 will set the mode, frequency, etc. of VFO B the same as VFO A if 
you tap A->B twice.

The K3 *can* transmit cross-mode if you set it up as indicated on page 
36 of the manual.
With cross-mode operation possible, it is not desirable to set all 
parameters of VFO B to the same as VFO A unless the operator intends to 
do exactly that.  Thus the double tap is required.

73,
Don W3FPR

On 11/19/2015 2:41 PM, Larry Gauthier (K8UT) wrote:
> Tom,
>
> When you tap/hold the <SPLIT> button, watch the K3 display to see if 
> you get the error message "SPL N/A"  (Split Not Available ?). This 
> message appears when VFOb is set for a different mode than VFOa. To 
> recover I tap the <A->B> button (which forces VFOb to VFOa's frequency 
> and mode) and then re-tap/hold <SPLIT>.
>
> Not sure if this is a Bug or a Feature. Would I ever want to be split 
> cross-mode? I would prefer if the radio forced the modes equal and 
> then performed the split operation rather than present me with an 
> error message.
>
> -larry (K8UT)