[Elecraft] Grounding the Elecraft

[Don Wilhelm]

Frank,

There is a ground screw on each box of the K-Line, use it to hold a ring 
terminal.  The K2/100 also has a grounding screw.  With the KX3, you can 
put a ring terminal under one of the thumbscrews.
Which piece of Elecraft gear do you have that is lacking such a screw?  
The proper answer to your question is transceiver dependent.

73,
Don W3FPR

On 11/18/2015 3:45 PM, Frank wrote:
> I am a firm believer in a good ground for ANY transceiver,  but need advice:
> Where would be the best location (internal  OR external ) to install a small bolt for attaching a ground rather than having to us a “clip” attached to a ground.
>
> Thanks, Frank Sharit, W6DHN
>
>
>
> Sent from Mail for Windows 10
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com