[Elecraft] e Re: [K3] Recent post about n1mm macros to send FSK without fancy hardware

[Jim Rogers]

Hi Bill,  Well I just checked it out here and sure 'nuff, it works. On 
page 36 of the K3s manual (page 34) of the K3 manual the setup is 
described.  The K3 doesn't care if the excitation comes from the 
computer via the KY command or from the paddles so have a ball my 
friend. You can use the CW macros on RTTY.  I do not have n1mm but did 
all of my testing with HRD's DM780 using the KY command.  RTTY without 
an interface.... works for me!

Jim, W4ATK

On H/11/2015 11:50 AM, Bill Conkling wrote:
> There was a recent post on a reflector (don’t know which one) that listed n1mm function key macros for sending FSK using KY commands I think.  It didn’t seem to require any interface other than usual serial cable.  I am interested in this information.
>
> If this will work with DX Labs as well, please include that info.
>
> Thanks for your time.
>
> …bill nr4c
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jim.w4atk at gmail.com