[Elecraft] K3S: CW keying via USB question

[John E Bastin]

On 07 Nov 2015, at 11:04, Dick via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> Using only the USB Port cable to the CPU, can CW be transmitted on the  K3S 
> using N1MM Logger+ or DX-Lab software without the use of a  WinKey?

I’m doing it now with DXLab. I’m using the K3, but there’s no reason the K3s should be any different.

http://www.dxlabsuite.com/dxlabwiki/K3CWRTTYXcv

Hope this helps.

73,

John K8AJS
bastinj at gmail.com