[Elecraft] USB for K2

[Matt Maguire]

Do not plug in *any* RS232 adapter, including those supplied by Elecraft, without using an adapter cable as described on page 13 of the KIO2 manual:http://www.elecraft.com/manual/KIO2%20man%20rev%20C%20.pdf
Failure to put that adapter between the K2 and the RS232 connection may result in serious damage to the K2.
73, Matt VK2RQ

Envoyé à partir d'Outlook




On Thu, Nov 5, 2015 at 3:50 PM -0800, "Tom McCulloch" <thom2 at att.net> wrote:










Hi gang,

I think this may have been previously covered, so I apologize if I'm 
redundant.

I know the cable from the K2 to the nine pin plug is not wired in a 
"standard" way,  but how do I go about interfacing my K2 to the USB port 
on my computer?

I see this on Amazon, but I'm hesitant to try it:

http://www.amazon.com/dp/B00425S1H8/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2BU7MNUYG3YU2&coliid=I1591SJBBKODFX

Thanks for your help with this,

Tom, WB2QDG
K2 #1103
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to matt.vk2rq at gmail.com