[Elecraft] Soldering crimped connectors is not a good thing.

[Phil Hystad]

I own the Anderson Power Pole Crimper and it is an excellent tool.  Best crimping tool I have ever used.

Highly recommend.  Not sure what it is costing these days but I paid $50 about 5 years ago.

73, phil, K7PEH


> On Nov 5, 2015, at 9:56 AM, Walter Underwood <wunder at wunderwood.org> wrote:
> 
> I recommend searching the internet and Amazon for “anderson power pole crimper”.
> 
> wunder
> K6WRU
> CM87wj
> http://observer.wunderwood.org/ (my blog)
> 
>> On Nov 5, 2015, at 9:51 AM, David Cole <dave at nk7z.net> wrote:
>> 
>> Could someone recommend a good crimper please?  This has been a most
>> interesting discussion.
>> -- 
>> Thanks and 73's,
>> For equipment, and software setups and reviews see:
>> www.nk7z.net
>> 
>> For MixW support see;
>> http://groups.yahoo.com/neo/groups/mixw/info
>> For Dopplergram information see:
>> http://groups.yahoo.com/neo/groups/dopplergram/info
>> For MM-SSTV see:
>> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>> 
>> 
>> On Thu, 2015-11-05 at 12:41 -0500, Michael Blake wrote:
>>> leroy, thanks for your comments.  I don’t know what to say other than your experiences are vastly different from my personal experiences as well as the experiences of both the telephone industry  (Bell System and Verizon) and the automotive industry.
>>> 
>>> While not intending to be mean spirited the fact that you have experienced this probably means that the failed connections were not really properly crimped.
>>> 
>>> Michael Blake
>>> K9JRI
>>> 
>>> 
>>> 
>>>> On Nov 5, 2015, at 11:05 AM, lmarion <lmarion at mt.net> wrote:
>>>> 
>>>> 
>>>> I have the proper tools.
>>>> Over time the joints have become intermittent.
>>>> 
>>>> The joints I properly crimped and soldered have never become intermittent.
>>>> I guess the molecular bond with solder is greater  ; )
>>>> 
>>>> Leroy
>>>> 
>>>> -----Original Message----- From: Robert Harmon
>>>> Sent: Thursday, November 05, 2015 8:30 AM
>>>> To: elecraft at mailman.qth.net
>>>> Subject: Re: [Elecraft] Soldering crimped connectors is not a good thing.
>>>> 
>>>> thanks Mike,   good info !
>>>> 
>>>> 73
>>>> Bob
>>>> K6UJ
>>>> 
>>>> 
>>>> 
>>>> 
>>>> 
>>>> On 11/5/15 7:18 AM, Michael Blake wrote:
>>>>> While many people recommend soldering crimped connectors, such as Anderson Power Poles, it is not a very good idea.  The reason(s) it is neither required, nor desired, is partially as follows:
>>>>> 
>>>>> 1. A PROPERLY crimped connection creates a molecular bond between the conductor and the connector that is more conductive than soldering.
>>>>> 2. The soldering process causes corrosion because even rosin core solder is slightly acidic.
>>>>> 3. The solder that flows into or onto the conductor (wire) causes it to stiffen and increases the probability that vibration or movement will cause the wire to break at that point.
>>>>> 4. The annealing of the copper wire is altered which also increases the possibility of wire breakage due to vibration or movement.
>>>>> 
>>>>> It is absolutely necessary that the proper tool be used for the connection being crimped.  If you are going to use a crimped connection it is imperative that you have a tool that matches the connector.  If you do not have the proper tool then DO NOT use crimped connections.
>>>>> 
>>>>> Michael Blake
>>>>> k9jri at outlook.com
>>>>> 
>>>>> 
>>>>> 
>>>>> ______________________________________________________________
>>>>> Elecraft mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>> 
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>> Message delivered to k6uj at pacbell.net
>>>>> 
>>>> 
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>> 
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to lmarion at mt.net
>>>> 
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>> 
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to k9jri at outlook.com
>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to dave at nk7z.net
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wunder at wunderwood.org
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to phystad at mac.com