[Elecraft] K3: transverter question

[Don Wilhelm]

Jim,

Just assign each transverter to a unique TRN address number.  The XV144 
can be TRN1,2,3, or 4 depending on the setting of the DIP switch inside 
the XV144.  The internal K3 k144XV option is INT TRN1.
I don't have either the internal or external 144 transverter, so I 
cannot test whether there is a conflict between INT TRN1 and the 
external TRN1, but to be safe, I would suggest setting the external 
XV144 to TRN2, 3, or 4.

73,
Don W3FPR

On 11/3/2015 8:39 AM, Jim Spears wrote:
> Is it possible to configure the XV menu entries so as to have two
> transverters defined with 144 MHz (operating band) -> 28 MHz (IF band)
> configurations?  One would be the internal K144XV and other an external
> transverter using the low level XVTR IN and OUT jacks.
>
>