[Elecraft] Working Split with the K3S

[Byron Peebles]

OKay, so this really drove me nuts.  I have the macro set up to toggle 
split now.

What goes wrong?  Wrong antenna was one thing.  How I end up with ANT 
instead of ANT1 is beyond me.

I don't have the problem anymore, probably because I've gone through 
every band and mode memory and I've finally got everything on the proper 
antenna, including using the KAT utility to disable unused antenna ports.

Seeing things in split doesn't mean you hear SUB, so make sure the SUB 
is displayed in the K3S and you should be good.  Split and Sub are not 
the same, but they are both great features.

When I use the SPLIT macro, I have it set both SPLIT and SUB and then I 
tab SUB if I don't want to hear the SPLIT frequency.  Then, when I'm 
finsihed with split, the PF key sets things to NORMAL again.

73, Byron

On 11/02/2015 05:58 PM, Amateur Radio Operator N5GE wrote:
> I'm trying to set-up working Split Folowing Fred Cady's K3s manua land
> I'm having trouble setting it up on 17m.  I have it setup for 20m and
> it works very well.  I can hear the the audio from the sub rx in
> pileups-ups and it works great!
>
> On 17m I followed the instructions, and I can hear the audio from the
> main RX in my left ear, but I cannot hear the audio from the sub RX in
> my right ear, but I can see that the VFO's are in split mode by
> looking at the P3's display.
>
> What am I missing here?
>
> Any advice is appreciated.
>
> Thanks,
>
> ARS N5GE
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nz3o at arrl.net
>