[Elecraft] IC-2800

[steve]

have you tried RT systems...  Will software for a IC-2820 work with the 
2800 ??
see 
https://www.rtsystemsinc.com/IC-2820-programming-software-and-USB-cable-s/1869.htm 
I am using their software on a W7 64 bit machine and they update.

steve wb3lgc

On 26-May-15 7:49 PM, Fred Jensen wrote:
> Msg off to ICOM Tech Support.  We'll see how this compares to Elecraft 
> support and service.  I really need to reorganize the memories on the 
> 2800, the UI through the control head is marginally OK when just 
> adding a new one, it's a non-starter for a reorg.  The programming SW 
> won't run on 64-bit Windoze.  I finally got a virtual machine running 
> using Virtual Box, installed an old version of XP, and voila!  the 
> ICOM software runs.  Now I find I can't get the radio into clone mode. 
> Ctrl-Alt-Delete for an IC2800 is mic UP button and 4th button down on 
> the left side of the controller while powering it up.  Done it at 
> least 15 times, and it's still just a radio, no comm out the port.
>
> The only thing non-standard is an HM-133V mic which replaced the 
> original that failed a number of years ago.  Any ideas welcome. If 
> Elecraft were to make a 2m/70cm mobile radio with a remote control 
> head and an LCD TV for a display screen, I'd be the first to order. :-)
>
> 73,
>
> Fred K6DGW
> - Northern California Contest Club
> - CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015
> - www.cqp.org
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to sm.shearer.01 at gmail.com
>
>