[Elecraft] KPA100 final test.

[Michael Eberle]

Have you double checked that the W2 is on the 200 or 2000 watt scale as 
opposed to 20 watts?

Mike
KI0HA

On 5/22/2015 6:42 PM, Brian Denley wrote:
> Don et al:
> I am doing the final test on a KPA100 kit that I have assembled.  Every test has been nominal but my W2 peaks out at 20 watts.  I do get 5 watts when set at 5, etc. but for any setting above 20, I just get 20 watts out.  If I go into tune mode for 10 sec or so, the KPA100 transistors do get hot.  Every resistance test, etc. has been perfect, my bias is set at .97 amps.  T-R is set to 8R- HOLD.
>
> Any ideas would be appreciated.
>
> Brian
> KB1VBF
> Sent from my iPad
>