[Elecraft] New K3/K3S Beta Firmware, rev. 5.26: Support for K3S and upgraded modules

[Wes (N7WS)]

I'm afraid I fail to see the "logic" in this too.


On 5/20/2015 2:12 PM, Oliver Dröse wrote:
> Am 20.05.2015 um 02:29 schrieb Wayne Burdick:
>> * LINE IN/OUT AUDIO USE WITH USB PORT (K3S, KIO3B): If a plug is inserted 
>> into the LINE IN jack on the K3S, this audio signal will override the 
>> digitized audio line-in data that is present in the USB cable. LINE OUT on 
>> the K3S, however, is always available even if the USB cable is being used for 
>> line-out.
>
> I can already see the "Help! I don't get any audio from my USB connection!" 
> emails on the reflector. ;-)
>
> Wayne: If you're ever going to redesign the I/O module again (KIO3C anyone? 
> ;-)) please make that a menu selection and also store different settings, i.e. 
> line/mic gain for USB audio and line/mic gain for the 3,5 mm connection. 
> That's one of the really neat things I like on a friend's TS-590. ;-)
>
> 73, Olli - DH8BQA
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wes at triconet.org
>