[Elecraft] Rear Panel mic connection

[Sfbonk via Elecraft]

I use both. For contests and DXpetitions, use a Heil pro set and foot switch with the mic in the back. For casual operating, prefer a desk mike into the front connector. Nice thing with the K3 is that it is just a menu selection to switch between the two. Elements seem to be a good match since I don't have to change gain / compression. Smooth with no issues noted.

W3OU Steve

 

 

 

-----Original Message-----
From: Frank via Elecraft <elecraft at mailman.qth.net>
To: elecraft <elecraft at mailman.qth.net>
Sent: Tue, May 19, 2015 6:40 am
Subject: [Elecraft] Rear Panel mic connection


I recall Eric mentioning an advantage to connecting the headset boom mic to the
rear panel headphone and mic connectors.  The manufacturer of the headset
advised this was not preferable due to the potential for ground loops on the mic
side.  Has anyone had any experience with ground loops on the mic from headsets
connected to the rear jacks?  I'd love to use them to free up the front of the
rig.

Frank
KG6N
______________________________________________________________
Elecraft
mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This
list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to sfbonk at aol.com