[Elecraft] Rear Panel mic connection

[Anthony Scandurra]

Lots of successful Yamaha CM500 users utilize the rear connections, too.

73, Tony K4QE

On Tue, May 19, 2015 at 8:57 AM, Eric Swartz - WA6HHQ, Elecraft <
eric at elecraft.com> wrote:

> Further on this - We have hundreds of users ( and possibly thousands)
> happily using the rear panel mic connector with the Heil Headsets. It is
> the preferred connection for many.
>
> 73,
>
> Eric
> elecraft.com
> _..._
>
>
>
> > On May 19, 2015, at 2:21 AM, Frank via Elecraft <
> elecraft at mailman.qth.net> wrote:
> >
> > I recall Eric mentioning an advantage to connecting the headset boom mic
> to the rear panel headphone and mic connectors.  The manufacturer of the
> headset advised this was not preferable due to the potential for ground
> loops on the mic side.  Has anyone had any experience with ground loops on
> the mic from headsets connected to the rear jacks?  I'd love to use them to
> free up the front of the rig.
> >
> > Frank KG6N
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to elist_copy at elecraft.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to anthony.scandurra at gmail.com
>