[Elecraft] Elecraft KX3 Utility for OS X Revision 1.14.4.11

Mon May 18 13:17:05 EDT 2015

Removed all batteries then replaced and the radio came back (FW rev 01.87).
Tried connecting again, it seemed to work and tried to update the firmware
but failed. Here are the logs;

Elecraft KX3 Utility for OS X Revision 1.14.4.11
KX3 MCU revision --.  RS232 speed 38400 bit/s.
Starting MCU firmware load
Verifying file "fmcu0233.hex"
"fmcu0233.hex" verification succeeded
Preparing KX3 for MCU firmware download
Send "LDM;"
Timer Elapsed 2000 ms
Send "D"
Response "D" 17 ms
Sending firmware file "fmcu0233.hex" to MCU
Send 132 bytes
0xAA001200280EE66E09ECFEF0E552A7EFFDF01200FFFFFFFFFFFFFFFFFFFFFFFF09EF24F01200FFFFFFFFFFFFFFFFFFFF00005FECC3F0B90E496EDF0E4A6E010E39EFCEF05FECC3F0200E496EE00E4A6E010E39EFCEF05FECC3F0050E4B6EE10E4C6E010E4D6EFE0EDBCF4EF032ECC5F009ECD2F05BEFC3F05FECC3F08E0E496E0008005E
Response "" 17 ms
Send 132 bytes
0xAA001200280EE66E09ECFEF0E552A7EFFDF01200FFFFFFFFFFFFFFFFFFFFFFFF09EF24F01200FFFFFFFFFFFFFFFFFFFF00005FECC3F0B90E496EDF0E4A6E010E39EFCEF05FECC3F0200E496EE00E4A6E010E39EFCEF05FECC3F0050E4B6EE10E4C6E010E4D6EFE0EDBCF4EF032ECC5F009ECD2F05BEFC3F05FECC3F08E0E496E0008005E
Response "" 5 ms
Send 132 bytes
0xAA001200280EE66E09ECFEF0E552A7EFFDF01200FFFFFFFFFFFFFFFFFFFFFFFF09EF24F01200FFFFFFFFFFFFFFFFFFFF00005FECC3F0B90E496EDF0E4A6E010E39EFCEF05FECC3F0200E496EE00E4A6E010E39EFCEF05FECC3F0050E4B6EE10E4C6E010E4D6EFE0EDBCF4EF032ECC5F009ECD2F05BEFC3F05FECC3F08E0E496E0008005E
Response "" 6 ms
Send 132 bytes
0xAA001200280EE66E09ECFEF0E552A7EFFDF01200FFFFFFFFFFFFFFFFFFFFFFFF09EF24F01200FFFFFFFFFFFFFFFFFFFF00005FECC3F0B90E496EDF0E4A6E010E39EFCEF05FECC3F0200E496EE00E4A6E010E39EFCEF05FECC3F0050E4B6EE10E4C6E010E4D6EFE0EDBCF4EF032ECC5F009ECD2F05BEFC3F05FECC3F08E0E496E0008005E
Response "l" 6 ms
Send 132 bytes
0xAA001200280EE66E09ECFEF0E552A7EFFDF01200FFFFFFFFFFFFFFFFFFFFFFFF09EF24F01200FFFFFFFFFFFFFFFFFFFF00005FECC3F0B90E496EDF0E4A6E010E39EFCEF05FECC3F0200E496EE00E4A6E010E39EFCEF05FECC3F0050E4B6EE10E4C6E010E4D6EFE0EDBCF4EF032ECC5F009ECD2F05BEFC3F05FECC3F08E0E496E0008005E
Response "l" 6 ms
Click "Close" to close this window

11:04:15 Elecraft KX3 Utility for OS X Revision 1.14.4.11
11:04:15 OS X Version 10.8.5 Mountain Lion
11:04:15 KX3 boot loader is waiting for MCU firmware load.
11:04:15 New firmware is available for your KX3
11:04:35 OS X Version 10.8.5 Mountain Lion
11:04:35 Loading firmware from Macintosh
HD:Users:terrylucius:Library:Application Support:Elecraft:KX3 Firmware:
11:04:36 MCU firmware file "fmcu0233.hex" verified
11:04:36 Preparing KX3 for MCU firmware download
11:04:36 Sending firmware file "fmcu0233.hex" to MCU
11:04:36 Regained synchronization with  after 1 bytes11:04:36 Regained
synchronization with  after 1 bytes11:04:36 Regained synchronization with ~
after 1 bytes11:04:36 Regained synchronization with ~ after 1 bytes11:04:36
Regained synchronization with ~ after 1 bytes11:04:36 MCU Block write failed
at address: 2048
11:04:36 MCU programming failed. Verify file source and revision.
11:04:36 Turn the KX3 off and back on, then re-try the download.
11:04:36 Total number of block retries was 5
11:04:36 Greatest number of retries for any block was 5
11:05:22 MCU firmware load failed
11:05:22 Elapsed time: 48 seconds
11:05:28 Connected device does not appear to be an Elecraft KX3
11:05:28 Ready

11:08:01 Connecting to ftp.elecraft.com. Please be patient, this takes a few
seconds.
11:08:02 220 ProFTPD 1.3.2e Server (ftp.elecraft.com) [63.249.121.93]
11:08:02 USER anonymous
11:08:02 Send UserID
11:08:02 331 Anonymous login ok, send your complete email address as your
password
11:08:02 PASS
11:08:02 Send Password
11:08:02 230 Anonymous access granted, restrictions apply
11:08:02 Connected to Elecraft server.
11:08:02 200 NOOP command successful.
11:08:02 CWD /KX3/firmware
11:08:02 Change directory to: /KX3/firmware
11:08:02 250 CWD command successful
11:08:02 Directory Change Complete.
11:08:02 200 NOOP command successful.
11:08:02 PASV
11:08:02 Passive Mode
11:08:03 227 Entering Passive Mode (63,249,121,93,201,237).
11:08:03 200 NOOP command successful.
11:08:03 PWD
11:08:03 Get working directory for 
11:08:03 257 "/KX3/firmware" is the current directory
11:08:03 NLST
11:08:03 Get full directory list for /KX3/firmware
11:08:03 150 Opening ASCII mode data connection for file list
11:08:03 226-Transfer complete
11:08:03 226 Quotas off
11:08:03 200 NOOP command successful.
11:08:03 The file list has been transferred.
11:08:03 Your folder has the most recent KX3 firmware files from Elecraft.
11:08:03 QUIT
11:08:03 Send Logoff Command
11:08:07 221 Goodbye.
11:08:07 Ready
11:08:10 Connected device does not appear to be an Elecraft KX3
11:08:25 Connected device does not appear to be an Elecraft KX3

--
View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-KX3-Utility-for-OS-X-Revision-1-14-4-11-tp7603164p7603201.html
Sent from the Elecraft mailing list archive at Nabble.com.