[Elecraft] Power settings

[Vic Rosenthal]

Check that you have CONFIG:PWR SET to PER BAND. Not sure, because I don't have a transverter.

Vic 4X6GP/K2VCO 

> On May 15, 2015, at 12:43 PM, Ian Westerland <iwesterl at bigpond.net.au> wrote:
> 
> Hi!  I run my K3 on 100 Watts on HF bands.  When I switch to 2 meters the power changes to around 10 Watts but doesn't revert to the 100 setting when I go back toHF.  Should the power level change back and if not, what setting do I need to change?  My speach output is not giving me quite enough information to know what to do.
> 
> 73 to all.
> 
> 
> 
> Ian Westerland,  VK3vin  
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2vco.vic at gmail.com