[Elecraft] K3S Quick Review

[David Ferrington, M0XDF]

I assume with some switch gear, we can flip between a W2 and the P3?

-- 73 de M0XDF

> On 14 May 2015, at 20:14, Rick WA6NHC <happymoosephoto at gmail.com> wrote:
> 
> Thank you Alan.  Yes, the P3 upgrade should have been on a separate announcement, but most of us can figure it out.
> 
> That's good news.  It means I will only need one sensor and spend the rest of my toy budget on other Elecraft goodies ...  ;o)
> 
> Can you translate RSN into a specific shipping date?
> 
> Rick nhc
> 
>> On 5/14/2015 12:00 PM, Alan wrote:
>>> On 05/14/2015 09:41 AM, Rick WA6NHC wrote:
>>> ...
>>> 
>>> It mentions the P3 TX monitor, so that's in RSN time frame (real soon
>>> now).  BIG want, hoping for a 100/ 750 watt sensor for K3/100 plus
>>> KPA500.  Then a 2k sensor for full legal power.
>> 
>> One point to emphasize about the P3 transmit monitor is that it is not dependent on the K3s - it works just fine with a K3.
>> 
>> The 2 kW sensor works well at lower power levels.  The modulation envelope display auto-scales and gives a good clean display down to a few watts with the 2 kW sensor.  You can set the "analog meter" full-scale to 20W, 120W, 200W, 700W, 1200W or 2000W (and 1/10 those values for the 200W sensors).
>> 
>> Alan N1AL
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to m0xdf at alphadene.co.uk