[Elecraft] K3S Quick Review

[Alan]

I just checked.  It's there in the P3 section.  $199 for the adapter 
board and one directional coupler.

Questions about the P3 transmit monitor are pretty well covered in the FAQ:

http://www.elecraft.com/manual/P3%20Xmit%20Mon%20FAQ-ver-A-7.pdf

Alan N1AL


On 05/14/2015 12:11 PM, Phil Wheeler wrote:
> Is the P3 TX monitor up at the order page?  So much there I may have
> missed it, Alan.
>
> Phil W7OX
>
> On 5/14/15 12:00 PM, Alan wrote:
>> On 05/14/2015 09:41 AM, Rick WA6NHC wrote:
>> ...
>>>
>>> It mentions the P3 TX monitor, so that's in RSN time frame (real soon
>>> now).  BIG want, hoping for a 100/ 750 watt sensor for K3/100 plus
>>> KPA500.  Then a 2k sensor for full legal power.
>>
>> One point to emphasize about the P3 transmit monitor is that it is not
>> dependent on the K3s - it works just fine with a K3.
>>
>> The 2 kW sensor works well at lower power levels.  The modulation
>> envelope display auto-scales and gives a good clean display down to a
>> few watts with the 2 kW sensor.  You can set the "analog meter"
>> full-scale to 20W, 120W, 200W, 700W, 1200W or 2000W (and 1/10 those
>> values for the 200W sensors).
>>
>> Alan N1AL
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1al at sonic.net
>