[Elecraft] *NEW* P3 Transmit Monitor Feature and use of W2 sensor

[Alan]

An older W2 wattmeter sensor works unmodified with the P3 sensor option, 
except that you don't get full bandwidth on the modulation envelope 
display.  It would be fairly easy to modify an older sensor if you are 
comfortable working with surface-count components.  It is just a matter 
of replacing several capacitors.

On the other hand, I expect that most people will just buy a new sensor. 
  After all, you still need one for your W2.  Even if you sell the W2, 
the new buyer will need a sensor for it.

Alan N1AL


On 05/14/2015 08:39 AM, Phil Hystad wrote:
> I just read the FAQ describing the new P3 Transmit monitor feature and from what I read I see NOTHING about being able to use my existing W2 monitoring sensor with the new P3 transmit monitor feature.  It seemed like such a logical reuse of existing equipment.  It may be too early, but I didn’t find any way to order just the new P3 adapter board by itself.
>
> I would hope that the adapter board, the cable, and the sensor are all individually priced with the existing W2 sensors being reusable.
>
> Did I overlook something or assume too much?
>
> 73, phil, K7PEH
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1al at sonic.net
>
>