[Elecraft] KAT500 Antenna Grounding
David Ahrendts
davidahrendts at me.com
Mon May 11 12:59:47 EDT 2015
Thanks everyone for all of the advice. Declaring this thread concluded.
> On May 11, 2015, at 9:55 AM, Wes (N7WS) <wes at triconet.org> wrote:
>
> You've received some other advice/opinions about whether or not "ground" is "ground."
>
> I won't expand on that but will address the real problem that you pose. IMHO, whether or not you "ground", "short" or otherwise screw up the impedance of the driven element of the inactive antenna, there will be interaction between the two antennas. Regardless of what you do to the inactive antenna's DE, all of the elements on both antennas are coupled. To what extent, who knows?
>
> This is true whenever there are two or more antennas in proximity Sometimes the effect is useful (stacked antennas); sometimes not. The only real way to know is to do some modeling. You might see some effect upon the driven impedance of the active antenna, but this doesn't predict directivity effects. One option might be to rotate one boom 90 degrees to the other. Of course, now the boom of one antenna might upset the elements of the other. Absent a science project, I suggest that you don't worry about it.
>
> If you want to have some fun, however, you could ask Cushcraft to explain themselves.
>
> Wes N7WS
>
> On Fri,5/8/2015 5:18 PM, David Ahrendts wrote:
>>> I’m considering stacking the Cushcraft A503S 6M yagi with my MA5B mini-beam rather closely — like five-feet vertical separation (Rohn five-foot tripod on the roof in a tight lot). Cushcraft recommends using an antenna switch to ground the unused antenna since the two would react with each other at 17M. Both would be connected to the KAT500. So here’s the question: are the un-selected antennas out of the three on the KAT500 grounded through the KAT500 or do they remain just unattached but active?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to davidahrendts at me.com
David Ahrendts davidahrendts at me.com
More information about the Elecraft
mailing list