[Elecraft] Gonset 6 meter radio schematic.

[Joe Subich, W4TV]

Gonset 3049 ... schematic is available on BAMA if you bother to look
through the Gonset directory.

73,

   ... Joe, W4TV


On 2015-05-10 1:10 PM, David Robertson wrote:
> Thanks for all the replies. Sorry I could not give you any model number
> information.
> I was furnished a system schematic but most of it is unreadable including
> the area on the drawing where the schematic number is.
> Let me describe the radio to you.
>
> It is all vacuum tubes (valves) and contains a ac/dc ( vibrator ) power
> supply that runs on either 115 AC or 6 volts DC. Units were available for
> 12 volt operation.
> It has one crystal socket but can be fitted with a 4 or 5 position crystal
> switch.
> The transmit/receive circuit uses a rotary switch, not a relay. The final
> is a 2E26 and uses link coupling to the antenna jack. I estimate the unit
> was built in the 1950s or 60s.
> It could be the first model of the Gooneybird.
>
> Really need a usable schematic.
> Thanks and 73
> Dave KD1NA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>