[Elecraft] [KX3] JT65 and JT9 possible TX issues

[Ross Primrose]

Yeah, I knew that.  I was asking if YOU have the factory TCXO or the 
upgraded one in your K3...

73, Ross N4RP

On 5/7/2015 3:01 PM, Jim Brown wrote:
> His advice is not specific to Elecraft products. Lots of WSJT 
> operators use vastly inferior radios. Think IC706, FT897, etc. 
> Obviously, it's less of an issue with better radios on both ends. :)
>
> 73, Jim K9YC
>
> On Thu,5/7/2015 11:50 AM, Ross Primrose wrote:
>> On 5/7/2015 2:38 PM, Jim Brown wrote:
>>> K1JT does not recommend JT9 on 6M for reasons of frequency 
>>> stability, but I've successfully used JT9 on 6M with my K3.
>>>
>>> 73, Jim K9YC
>>>
>>
>> With the factory TCXO, or the high-stability one?
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4rp at n4rp.com


-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”