[Elecraft] KPA500: How to troubleshoot "distorted audio"

[Jack Brindle]

Jim;

Gary is right. What he means to tell you is that you should be looking for RF in the shack, getting into the K3.

If the KPA500 had gone non-linear, then you would be seeing all sorts of faults. You aren’t reporting any, so
most likely the problem is not in the KPA, but rather in something that cannot deal with the large amount of RF in the vicinity.
Did you change something recently, antenna, audio, cabling, something else in the shack?

- Jack Brindle, W6FB
Elecraft Engineering

> On May 3, 2015, at 3:21 PM, mcduffie at ag0n.net wrote:
> 
> 
>> My 3 month old KPA500 with my K3 and KAT500 had been giving me “outstanding audio� reports when first put into service. 
> 
> I'd bet it doesn't sound bad on a dummy load?
> 
> Gary
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com