[Elecraft] KXFL3 in KX3

[Johnny Siu]

Thanks,Matt, problem solved. Really stupid on my side.
73
Johnny VR2XMC
       寄件人︰ Matt VK2RQ <matt.vk2rq at gmail.com>
 收件人︰ Johnny Siu <vr2xmc at yahoo.com.hk> 
副本(CC)︰ Elecraft <elecraft at mailman.qth.net> 
 傳送日期︰ 2015年05月2日 (週六) 11:06 AM
 主題︰ Re: [Elecraft] KXFL3 in KX3
   
Hi Johnny,

Make sure you have RX SHFT=NOR rather than 8kHz. This is a per-band setting, and will prevent you from using the roofing filter if set wrong.

73, Matt VK2RQ



> On 2015-maj-02, at 12:31, Johnny Siu <vr2xmc at yahoo.com.hk> wrote:
> 
> 
>    Hello elecrafters,
> The installed KXFL3 in my KX3#609 seems not working for all the bands.  It only works in 14Mhz and 145mhz.  For the remaining bands, no matter how I change the filter passband width, the indication stays at FL1.  In the past, it will move to FL2 or FL3.
> Any ways to verify whether the KXFL3 is working?  
> 73
> Johnny VR2XMC
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to matt.vk2rq at gmail.com