[Elecraft] RTTY K3 Help
Joe Subich, W4TV
lists at subich.com
Mon Mar 30 16:02:33 EDT 2015
> I have the audio cables, and everything works fine for AFSK PSK31.
If everything works normally for PSK31, you should be able to use
the same configuration *except* you select AFSK A for RTTY in the
K3.
That should work with MMTTY or the MMTTY interface built into the
Digital Interface of N1MM Logger.
73,
... Joe, W4TV
On 2015-03-30 2:56 PM, Joe Moffatt wrote:
> I think I actually misworded things.
>
> I have N1MM and use it for CW all the time.
>
> I have the audio cables, and everything works fine for AFSK PSK31.
>
> I just have little experience recently with RTTY, and I just want to set it up correctly.
>
> Joe
>
>
>
> From: Gordon LaPoint [mailto:gordon.lapoint at gmail.com]
> Sent: Monday, March 30, 2015 1:51 PM
> To: Joe Moffatt; 'Elecraft Reflector'
> Subject: Re: [Elecraft] RTTY K3 Help
>
> On 03/30/2015 02:42 PM, Joe Moffatt wrote:
>> Apparently I haven't fooled with RTTY of any seriousness in years, but I am starting to get interested in DX chasing with it.
>>
>> So, how do you guys recommend setting up the K3. I see FSK is much preferred by most to AFSK using say FLDIGI and audio input now days.
>>
>> I know VERY little about this. I am a CW DX'er, but just interested in learning this and possibly doing a contest sometime.
>>
>> Thanks,
>>
>> Joe
>> AB5OR
>> Tupelo, MS
>>
>>
> Joe,
> What are you using for software? Do you have the interface's
> built, or bought?
> See: http://www.aa5au.com/rtty/ and: http://www.rttycontesting.com/
>
> I do lots of RTTY contesting using a K3 and WriteLog for software. N1MM
> also works good.
>
> Gordon - N1MGO
>
> ________________________________
> Total Control Panel
>
> Login<https://asp.reflexion.net/login?domain=selectconnect.net>
>
>
> To: joe at selectconnect.net<https://asp.reflexion.net/address-properties?aID=750607761&domain=selectconnect.net>
>
> From: gordon.lapoint at gmail.com<https://asp.reflexion.net/address-properties?aID=3174176846&domain=selectconnect.net>
>
>
> Message Score: 50
>
> High (60): Pass
>
> My Spam Blocking Level: Medium
>
> Medium (75): Pass
>
>
> Low (90): Pass
>
> Block<https://asp.reflexion.net/FooterAction?ver=2&bl-sender-address=1&rID=750607761&aID=3174176846&domain=selectconnect.net> this sender / Block<https://asp.reflexion.net/FooterAction?ver=2&ent=1&bl-sender-address=1&rID=750607761&aID=3174176846&domain=selectconnect.net> this sender enterprise-wide
>
> Block<https://asp.reflexion.net/FooterAction?ver=2&bl-sender-domain=1&rID=750607761&aID=3174176846&domain=selectconnect.net> gmail.com / Block<https://asp.reflexion.net/FooterAction?ver=2&ent=1&bl-sender-domain=1&rID=750607761&aID=3174176846&domain=selectconnect.net> gmail.com enterprise-wide
>
>
>
> This message was delivered because the content filter score did not exceed your filter level.
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>
More information about the Elecraft
mailing list