[Elecraft] Don't have a 50W dummy load

[Don Wilhelm]

I have heard the same thing about the original Heath Cantenna.
I have a homebrew gallon size "Cantenna" that I built many years ago.  I 
happened along some large wattage carbon resistors (about 1/2 inch in 
diameter and 2.5 inches long - maybe 25 watts each) and used several of 
them in parallel to create a 50 ohm load ( I recall it was 11 560 ohm 
resistors).  This was when I was a "cash-flow restricted ham".  I 
measured mine recently with my antenna analyzer and was surprised to 
find it was still less than 1.15 SWR up through 30 MHz.  This is despite 
reports that the old 'trusted' carbon carbon resistor changed value with 
age.  In any case, I am happy with the results of that old homebrew 
dummy load.

In the same batch of resistors, I also had many 1500 ohm units.  I was 
going to put 30 of them in parallel for a dry dummy load, but the lead 
length was excessive and the leads gave it an inductive characteristic 
above 14 MHz.

The original Cantenna used a single resistor which apparently did change 
in value with aging.

73,
Don W3FPR

On 3/24/2015 6:44 PM, Dave KW4M wrote:
> It's a good idea to check the resistance of any used dummy load, especially
> one that has some age on it.
>
> The resistance of my 30+ year old Heath Cantenna gradually reduced to 42
> ohms.  This was enough error for the power meter to indicate a potential
> transmitter problem.
>
> W1GA is selling non-inductive replacement resistors on eBay for use in the
> Cantenna.  I purchased one and it brought the resistance back to 50 ohms.
>
>
>
>
> -----
> Dave
> My Web Site
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/Don-t-have-a-50W-dummy-load-tp7600633p7600647.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>