[Elecraft] Don't have a 50W dummy load
Brian
kb9bvn at gmail.com
Tue Mar 24 17:39:04 EDT 2015
Excellent advice Don. I bought a 100w dummy load kit from OHR. It's
called the RFL-100 and it's about $40, comes in a very nice cabinet, and
takes less than an hour to build. It has come in handy more times than
I can count.
http://www.ohr.com/rfl100.htm
Oak Hills has some good goods.
73 de KB9BVN
Brian Murrey
On 3/24/2015 5:25 PM, Don Wilhelm wrote:
> Tony,
>
> "Scolding time" :-)
> One thing that I believe should be in every ham's shack is a dummy
> load capable of handling the maximum power that your station can
> develop. Ridge Equipment has a 50 ohm 75 watt dummy load good up to
> 1.5GHz for $11.95, but you will need an adapter for UHF connectors so
> that is an additional $5. See
> https://www.ridgeequipment.com/store/dummyloads.html.
>
> If ever you run into a problem, the first check is to see what happens
> when you transmit into a dummy load. That removes many variables -
> like RFI problems and antenna problems. It is the first check I
> recommend. If the rig works into the dummy load, you need to look for
> the problem somewhere other than the rig.
>
> I have had rigs sent to me for "repair" only to find that there is
> nothing wrong. The resulting repair charge is greater than the cost
> of a good dummy load.
>
> If you look for one at a hamfest, take your ohmmeter along to check if
> it is still a 50 ohm load - some are burned out from excessive power.
>
> 73,
> Don W3FPR
>
> On 3/24/2015 3:25 PM, Tony Estep wrote:
>> Well, now I downloaded the new firmware, only to discover that I have
>> to do
>> the 50W calibration. I have a 5W dummy load, but no 50W. The 5W
>> calibration
>> went okay. So do I have to get a 50W dummy load before I can use the K3
>> again? Or should I back down to the previous firmware? Or what?
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kb9bvn at gmail.com
>
More information about the Elecraft
mailing list