[Elecraft] Don't have a 50W dummy load

[Ross Primrose]

Surely there's a local ham you can borrow one from....

73, Ross N4RP

On 3/24/2015 3:25 PM, Tony Estep wrote:
> Well, now I downloaded the new firmware, only to discover that I have to do
> the 50W calibration. I have a 5W dummy load, but no 50W. The 5W calibration
> went okay. So do I have to get a 50W dummy load before I can use the K3
> again? Or should I back down to the previous firmware? Or what?
>
> KT0NY, the human dummy
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n4rp at n4rp.com


-- 
FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.”