[Elecraft] K3 Diversity VFO Linking

[James Balls]

So SUB VFO does nothing in diversity mode?

Press and hold SUB to enter diversity and just use Main VFO  .. both main  
and sub RX are using main vfo and the sub VFO and freq readout does  
nothing other than a split TX freq?

Is this right?

Jim M0CKE



On Tue, 24 Mar 2015 03:52:09 -0000, Nr4c <nr4c at widomaker.com> wrote:

> Update FW. Link is now menu item. Linking is not necessary for  
> Diversity. Diversity uses VFO A freq and synth for both receivers.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Mar 23, 2015, at 11:19 PM, James Balls <makidoja at gmail.com> wrote:
>>
>> Having just completed the Russian DX contest, our run station has 2  
>> antenna and listens in 2 directions, we use diversity but it is very  
>> annoying to have to keep re engaging VFO LINK in the menu every band  
>> change ..
>>
>> Could VFO Link have 3 options
>> OFF
>> ON
>> PERM
>>
>> PERM meaning VFO A and VFO B in Diversity mode are automatically linked  
>> and stay linked so long as Diversity is enabled
>>
>> Actually in PERM mode it would be good that when the SUB is held and  
>> Diversity is enabled that the mode freq etc is copied from A to B  
>> automatically.
>>
>> Could this be done in a future firmware upgrade please?
>>
>>
>> This would make much more sense to us and help to have 1 less thing to  
>> think about
>>
>>
>> Regards
>> Jim M0CKE - G2F
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to nr4c at widomaker.com


-- 
Using Opera's mail client: http://www.opera.com/mail/