[Elecraft] K3 APF

[Don Wilhelm]

Joe,

Check the Firmware level.  If it is not 5.14, you may not have the DUAL 
PB or APF available.  Those were temporarily omitted from a few firmware 
releases, but were restored in 5.14.
Check the Firmware Release Notes for details.

73,
Don W3FPR

On 3/23/2015 6:44 PM, Joe Moffatt wrote:
> I can't find the CONFIG: DUAL PB setting to enable APF in my K3.  Am I missing something?
>
> This is an up to date new K3.
>
>