[Elecraft] RX antenna

[Rich]

It may be because if you turn the preamp on while the rx ant is on. Then 
the preamp will turn ON/OFF when you toogle the RX ant ON/OFF.   I hope 
that is clearer than mud.

Rich

On 3/21/2015 10:53 PM, Ian Westerland wrote:
> Hi!  My K3 arrived last Wednesday and has since been set up and is now 
> in use.  It is a great transceiver I am enjoying getting to kno.
>
> I am using a Hampod to provide access via voice output and am 
> wondering about the RX antenna button on the K3 front pannel. When I 
> turn the RX antenna off and on, the Ham Pod announces "Pre-amp." When 
> I press the Pre-amp button the Ham Pod annunces "Pre-amp enabled/ 
> disabled" depending on which press of the button is active.
>
> Is the Pre-amp announcement on the RX antenna button what you see on 
> the screen?  I would have thought that the button for the RX antenna 
> would be announced as the Rx antenna off/on.
> By trying  out the transceiver I was able to interpret ok so am not 
> having any problems.
>
> Thanks in anticipation of an answer/explanation.
>
> 73
>
>
> Ian Westerland,  VK3vin
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rwnewbould at comcast.net
>