[Elecraft] K3/0 Mini KEY jack not working?

[Oliver Dröse]

Gerry,

CW must be put directly into the RRC. Why don't you use the CW input pin 
on the RRC's RJ45 (see RRC documentation)? Been using that since the 
first days of RRC making it to the market (when they did not even have 
the internal keyer) for a straight key or external keyer connection ...

73 & gl,
Olli - DH8BQA

Contest, DX & radio projects: http://www.dh8bqa.de


Am 21.03.2015 um 03:08 schrieb Gerry Hull:
> Hey All,
>
> So, I have this situation...
>
> I want to do RUDX tomorrow and trying to get things set up on the
> remote.
>
> For some reason, my key-over-dtr not working at the moment (may be a loose
> cable at the remote, but won't get there until after contest.)
>
> So, I can control the rig fine from N1MM at the remote end, and send with
> the paddle.  I was just going to add another RS-232 with DTR keying and
> drive the straight key jack.  Which I thought was the KEY mini plug just
> below the PADDLE mini plug on the back of the K3/0 mini.   However, it does
> not seem to do anything when I plug a straigth key in.
>
> Is it not working, or do I have to do something special?  Alternatively,
> I could find a spot inside the RRC to tack onto, if someone knows where.
>
> Sending the exchange with a paddle is not going to be fun :-(
>
> Let me know ASAP,
>
> 73, Gerry W1VE
>
>
> Gerry Hull, W1VE   | Hancock, NH USA
> AKA: VE1RM | VY2CDX | VO1CDX | 6Y6C | 8P9RM
> <http://www.yccc.org> <http://www.yccc.org/>
> <http://www.facebook.com/gerryhull>
> <https://plus.google.com/+GerryHull/posts>     <http://www.twitter.com/w1ve>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de
>