[Elecraft] K3 APF/Dual PBT

[W0MU Mike Fatchett]

What version of the software are you running?

You also need to peak the filter with the shift knob.

Mike W0MU

On 3/14/2015 10:31 PM, Michael Marx wrote:
> When I go into my K3’s CONFIG menu to the Dual PB setting, The only value I see in the screen is two dashes  —  Turning the knob that normally will change a menu value has no effect.  I’m wondering if my APF is working properly as even when I tune in a station on CW with the APF, it is very, very hollow and rings a lot.  Maybe this is normal.  It really does not help with a weak signal as it rings so badly you can’t hear the weak signal.  I don’t think this is what is supposed to happen?  The APF in my Icom IC746 works much better (and probably shouldn’t).
>
> But it does seem that the item in the config menu doesn’t work at all.  Is this normal, or is this because I’m using the latest beta firmware or something is wrong.
>
> 73 all,
>
> Mike WB0SND
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w0mu at w0mu.com