[Elecraft] Remote control of KPA with the addition of a KAT

[Oliver Dröse]

Howard,

you must not loose connection when putting the KAT500 in line! I use the 
same setup, i.e. K3 cabled to KAT500 cabled to KPA500 and have the cable 
between K3 and KAT500 modified to allow remote switch on of the KPA500. 
Just make sure you use a straight cable between the KAT500 and KPA500 
and the modification will still work.

73, Olli - DH8BQA

Contest, DX & radio projects: http://www.dh8bqa.de


Am 14.03.2015 um 21:19 schrieb Howard Sherer:
> I recently added a KAT 500 to my K3 station. I modified the interface cable
> to allow for remote power on off of the KPA via a macro key on the K3. Now
> with the cable going from the K3 to the KAT and then to the KPA I have lost
> the ability to remote the power on off of the KPA.
>
> How have others retained the ability to remote power control of the KPA
> while adding a KAT to their station?
>
> Howard AE3T
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to droese at necg.de
>