[Elecraft] Macro programming for KX3

[Matt VK2RQ]

I had a quick look at the programmer's reference, and saw some commands:
IC will read the status of the OFS LED
MP can be used to set the VFO OFS menu setting (maybe setting to off and back to on will put the OFS LED in a known state?)
SWT can be used to tap the OFS knob, which will toggle the LED

Maybe if you have a play with these commands you'll find out what is possible.

73,
Matt VK2RQ

> On 11 Mar 2015, at 6:37 am, geoff allsup <gallsup at whoi.edu> wrote:
> 
> Been playing with macros a bit and am wondering if there is a command available to set the Offset/VFO B control to VFO B? Haven't spotted something like that in the programmer's reference.
> 
> geoff - W1OH
> 
> -- 
> *******************************************************************
> Geoff Allsup, W1OH          gallsup at whoi.edu  or  w1oh at whoi.edu
> Senior Engineer                     Upper Ocean Processes Group
> Woods Hole Oceanographic Institution        Woods Hole, MA, USA
> *******************************************************************
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to matt.vk2rq at gmail.com