[Elecraft] KX3 utility Question

[Barry LaZar]

Jim,
     I wouldn't worry about it. Just push the tune button on the radio 
and let the KX3 sort it out and remember. I do so many antenna things 
around here and never depend on the memories. In fact I have a real 
problem going from 28.3 MHz. to 28.6 Mhz. but the radio keeps up with 
it. It takes just a moment for it to catch up, but it does.


73,
Barry
K3NDM

On 3/8/2015 1:42 PM, James Bennett wrote:
> Have a question about the KX3 utility. I recently upgraded my antenna system feedline, going from 450 ohm line to 600. Afterwards, I cleared the KX3 internal tuner’s memories and then re-trained it on every band at the proper segments.
>
> Now I want to use the KX3 in a portable operation with a different antenna for a while. Are my memorized antenna settings saved with the configuration? If so, I can back up the config, go do my portable operating with a different antenna, and then come back home and restore the configuration. Yes…..??????
>
> Thanks, Jim / W6JHB
> Folsom, CA
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k3ndm at comcast.net