[Elecraft] Useful P3 feature

[Guy Olinger K2AV]

Wouldn't that need to be dampened a lot. What happens if there is QRN, you
wouldn't want to be pushing the real stuff down. It would NOT be a simple
function, and there would be wide variation on what seemed "slick".

73, Guy

On Fri, Mar 6, 2015 at 10:16 AM, Joe Subich, W4TV <lists at subich.com> wrote:

>
>  I don't want to save the REF LVL. I want to save its relationship to
>> the noise level.
>>
>
> I agree.  Put another way, I'd like to see a reverse baseline "clamp" -
> something along the line of holding REF LVL 5 dB below the average
> noise level.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2015-03-06 7:56 AM, Vic Rosenthal 4X6GP/K2VCO wrote:
>
>> Here is something I would like to see on the P3.
>>
>> The P3 saves the REF LVL setting per band. But of course the noise level
>> on a given band varies as conditions change, and I find myself often
>> adjusting the REF LVL.
>>
>> The optimum setting is with the REF LVL just below the noise level.
>> Setting it higher loses detail, and setting it lower fills the waterfall
>> with noise.
>>
>> What I would like would be to adjust the REF LVL to optimum with respect
>> to the noise level and then save this relationship. Then I would like to
>> be able to push a function button to automatically adjust the REF LVL to
>> re-establish the same relationship.
>>
>> This would make the readjustment, which I find myself making every few
>> minutes sometimes, much quicker and easier.
>>
>> I don't want to save the REF LVL. I want to save its relationship to the
>> noise level.
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av.guy at gmail.com
>