[Elecraft] 6M repeater use K3

Bill Frantz frantz at pwpconsult.com
Thu Mar 5 21:48:32 EST 2015


Mine is set to the default, 5.0.
FWIW, the microcode is version 05.10
D1 is 02.83
D2 is 00.00 only one receiver
FL is 01.17
dr is 00.00 no DVR

When I checked the versions, the utility found newer software. I 
tried hitting the repeater with microcode 05.14 and FL 1.19, but 
it still fails. There is still that raspy note when listening to 
the K3 transmit frequency. The frequency is higher than my 600 
Hz CW tone. (Note that I am running the KX3 without an antenna 
and it is showing about S7 signal strength.)

73 Bill AE6JV


On 3/5/15 at 5:47 PM, mteberle at mchsi.com (Michael Eberle) wrote:

>I think there is a setting in the config menu for FM deviation.  Maybe it is set too low? 
>
>Mike 
>KI0HA
>
>
>Sent from my U.S. Cellular® Smartphone
>
><div>-------- Original message --------</div><div>From: Bill 
>Frantz <frantz at pwpconsult.com> </div><div>Date:03/05/2015  5:22 
>PM  (GMT-06:00) </div><div>To: Elecraft at mailman.qth.net 
></div><div>Subject: [Elecraft] 6M repeater use K3 </div><div>
></div>I've been trying to get my K3 to hit the WVARA repeater 
>on 6M. The repeater is about 2 miles from the house, so power 
>isn't an issue. I can hit it with my KX3 and the IC-706etc in 
>my car. I can also use the K3 with the 2M internal transverter 
>to reach 2M repeaters.
>
>I have the K3 in FM T mode, and when I hold PITCH on the K3, I 
>get 151.4 in the VFO-A display and PL TONE in the VFO-B display 
>which I think shows that the K3 should be sending the tone. 
>(Also when I PTT on the microphone, the K3 displays the correct 
>repeater input frequency in VFO-A.)
>
>When I use the KX3, the K3 can clearly hear when the KX3 is 
>sending the 151.4 Hz CTCSS tone and when it is not. Using the 
>KX3 to listen to the K3, I can not hear the K3 sending the 
>tone. I do hear a loud raspy note. quite unlike the tone I hear 
>when the KX3 is the transmitter. This raspy note does not go 
>away when I turn tone off after holding PITCH on the K3.
>
>Does anyone have any ideas?
>
>73 Bill AE6JV
>
>-----------------------------------------------------------------------
>Bill Frantz        |Security, like correctness, is| Periwinkle
>(408)356-8506      |not an add-on feature. - Attr-| 16345 
>Englewood Ave
>www.pwpconsult.com |ibuted to Andrew Tanenbaum    | Los Gatos, 
>CA 95032
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to mteberle at mchsi.com
-------------------------------------------------------------------------
Bill Frantz        | When it comes to the world     | Periwinkle
(408)356-8506      | around us, is there any choice | 16345 
Englewood Ave
www.pwpconsult.com | but to explore? - Lisa Randall | Los Gatos, 
CA 95032



More information about the Elecraft mailing list