[Elecraft] Nifty Ham Accessories Plus Opt booklet

[Jerry Knowlton]

One suggestion for the sub receiver installation is to cover the holes in
the shielding box so that those tiny screws and nuts don't fall through
causing you extra time and effort of removing things to find the little
suckers! 

 

I speak from experience !!

 

Best regards,

 

Jerry, W1ie

 

 

-----Original Message-----

From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of drewko

Sent: Sunday, March 01, 2015 10:06 AM

To: elecraft at mailman.qth.net

Subject: Re: [Elecraft] Nifty Ham Accessories Plus Opt booklet

 

One word: magnetic screwdriver (well, two words...)

 

73,

Drew

AF2Z

 

 

 

 

On Sun, 01 Mar 2015 07:32:33 -0500, you wrote:

 

> 

> 

>Hello Group-

> 

>I am currently working on building my K3 w/sub rx followed by finishing 

>off the P3 Pan Adapter. I have found that building this rig is very 

>time consuming with all the tiny screws, etc. Its like the designer of 

>this kit made things difficult with such construction.

>In other words trying to put 10 lbs of stuff in a 5 lb bag.

>Placing a daughter board upon RF PCB board with only sighting the holes 

>of the RF Pcb stand offs. I am ref to the gen cov rx kbpf3. There are 

>three separate mating connectors that are involved with this operation.

> 

>I was wondering if its worth the added cost to purchase the fol:

>Nifty Ham Accessories - K3  plus options.

>Elecraft P3 Pan Adapter - Mini Manual Op Guide.

> 

>As you know the K3 comes with a Op book. Some guys have told me its 

>worth buying this laminated booklet? Why?

> 

>Step by step slowly I build::::::::

> 

> 

>73

>Mike K8XF

>K3 Ser Nbr 8865

>Recd 2-24-2015

> 

> 

 

______________________________________________________________

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft at mailman.qth.net

 

This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html Message
delivered to w1ie at jetbroadband.com